Controller Remap Guide

Quick instructions for programming, saving, and resetting remappable buttons.

Default

Default Button Configuration

By default, back buttons are assigned to standard actions:

Triangle Circle Square X

Button placement may vary depending on installation.

You can remap all buttons using Programming Mode.

Program

Programming Mode

Enter Programming Mode

Option 1

Hold R1 + R2 + L1 + L2 for 8 seconds

LED flashes once
Option 2

Hold D-Pad Down + X + Square for 8 seconds

LED flashes once

Remap a back Button

  1. Hold the back button
  2. Tap the button you want to assign
  3. Release the back button
Example

Hold back button → Tap Triangle → Release

Back button now inputs Triangle

Save & Exit

Tap D-Pad Up

Reset

Master Reset

  1. Turn OFF the controller
  2. Hold Triangle + Circle + X + Square
  3. Turn the controller ON while holding
LED flashes rapidly 10 times
!
Note: Remapping features only apply if Remappable Buttons were selected in the controller builder. If your controller was not built with this option, Programming Mode will not function.